Exhibitor List
| Company | FFC FLUID SYSTEMS (SUZHOU) CO.LTD. |
| Country | United Kiongdom |
| Products | Plants Pumps and lifting systems |
| Hall | W5 |
| Booth | E88 |
| Website | www.ffc-uk.com |
| Introduction | FFC Fluid Systems (Suzhou) Co. Ltd.is committed to creating reliable, stable, efficient, energy saving and environmental protection pumps and fluid products. The product range involves water supply, industrial circulating pumps, HVAC circulating pumps, water treatment centrifugal pumps, valves and heat exchange units, etc. |
Products
| Vertical multi-stage centrifugal pump VMA series vertical multistage centrifugal pump is composed of pump base and pump head, the flow channel assembly and the outer cylinder are fixed between the base and the motor by the tie rod assembly, the inlet and outlet flange of the pump is on the same horizontal line, the pipe diameter is the same, the installation is convenient and fast, and the pipeline structure is compact. All are equipped with fully enclosed air-cooled two-stage motors or variable frequency motors. It is suitable for domestic water supply, industrial water and fire fighting. |
 |
| Horizontal multistage high pressure pump HMB series high pressure horizontal multistage centrifugal pump is cast by precision casting process. It is a multi-stage high head centrifugal pump for brackish water desalination, special membrane separation of high salt medium, high pressure cleaning, high-rise water supply, boiler water supply, brine long-distance transport and other fields. Using advanced hydraulic model, high efficiency, reliable operation, low vibration, low cost, long life, easy to replace parts. HME series high pressure horizontal multistage centrifugal pump adopts advanced hydraulic model, high efficiency, reliable operation and long life. Low noise and low vibration during pump operation. Low operating cost, easy maintenance, easy to replace parts. All flow parts are molded by precision casting process, with high precision and smooth flow path, beautiful appearance. Pump body strength, abrasion resistance layer more than 3mm, especially suitable for RO water treatment device pressurized high salt, high corrosive media. |
 |
| Submersible mixer SAG submersible mixer is the key equipment in the water treatment process. In the water treatment process, it can realize the homogeneity and flow of solid-liquid two phase or solid-liquid-gas three phase in the biochemical process. It consists of submersible motor, blade and installation system. Mixing series products often choose multi-stage, direct connection structure. Compared with the traditional, it has the advantages of compact structure, low energy consumption, high efficiency and easy maintenance. The impeller is made by precision casting or stamping, with high manufacturing precision, large thrust, simple and beautiful streamline shape, and anti-winding function. This series of products is suitable for solid-liquid mixing, mixing places. Mainly used in the municipal and industrial sewage treatment process of mixing, stirring occasions, through stirring to effectively prevent the settlement of suspended matter. |
 |
| Low speed current pusher The low speed flow pusher is widely used in the sewage treatment process of all kinds of oxidation ditch flow, biochemical tank mixing, but also can be used in river antifreeze, landscape water circulation, etc. The low speed current pusher is composed of submersible motor, reducer, blade and mounting system. It is characterized by small supporting power (1.5 ~ 7.5kW), low working speed (30 ~ 85r/min), large blade diameter (1100 ~ 2500mm), large flow field volume, and wide service range. Swept back banana blade design, with self-cleaning function, made of fiberglass or polyurethane vulcanization molding, with light weight, high strength, corrosion resistance and other advantages. Its excellent hydraulic performance can ensure good damping effect with liquid at low speed, thus creating a soft water flow. In addition to the role of pushing and creating water flow, this series of products also has a stirring function. |
 |
| Submersible return pump SRP series submersible reflux pump is a derivative product developed on the basis of submersible mixer production technology. The pump is a special equipment for secondary mixed liquid reflux, denitrification and nitrogen removal in sewage treatment plants, and can also be used in ground water supply and drainage projects requiring small head and large flow. |
 |
| Hyperboloid mixer Hyperboloid mixer is a new type of stirring device that can create a large volume flow. Its comprehensive advantage is that it can obtain a large area, three-dimensional circulation, and soft flow with less investment and lower energy consumption. It has become the preferred product in dual-phase solid-liquid or three-phase solid-liquid gas mixing occasions. The unique structural design of the hyperbolic impeller is the perfect combination of fluid characteristics and mechanical motion to the maximum extent. It is widely used in environmental protection, chemical industry, energy, light industry and other industries that need to carry out two-phase solid-liquid or three-phase solid-liquid gas mixing of liquids, especially suitable for coagulation pool, regulating pool, anaerobic pool, hydrolysis acidification pool, nitrification pool and denitrification pool in sewage treatment process. |
 |
| End suction pump End suction centrifugal pump is a single stage, single suction, horizontal centrifugal pump. Its product structure is unique and novel, advanced and reliable performance, stable and durable quality, is the world's leading energy-saving products. It has the characteristics of saving energy, occupying less space, convenient maintenance, etc., especially suitable for HVAC, air conditioning and other industrial circulating cooling water and other occasions. |
 |
| Axially split pump HS(V) series open pump is a non-self-priming single stage double suction shaft centrifugal volute pump, with high energy efficiency, long life, low vibration, stable and reliable operation, easy maintenance and other characteristics, is ideal for commercial buildings, water applications and industrial projects. The center open design facilitates the removal of the upper pump cover and the pump rotor assembly (bearings, impeller and shaft seal device, etc.) without removing the motor and piping. Bearing housing design independent, no need to remove the upper pump cover for maintenance. The double volute design reduces the radial load of the shaft, prolonging the service life of the mechanical seal and bearing, reducing vibration and improving the operating stability of the pump. The pumps are available in two mounting modes: horizontal HS and vertical HSV. Vertical installation reduces footprint and is particularly suitable for installation in restricted space areas. |
 |
| Imported high pressure and high temperature pumps High inlet pressure booster pump is designed for RO reverse osmosis in the field of inter-stage booster and design, this type of pump head is not high, inlet pressure according to the process requirements, generally 2.0~7.0MPa or higher, compared with conventional end-suction pump, its pressure level, shell thickness, seal structure, bearing configuration and axial force balance is the key node of design and manufacturing. There are three pressure levels respectively, SESF(inlet pressure range 1.5 ~ 4MPa), SEST(inlet pressure range 4 ~ 8.5MPa), SESG(inlet pressure of 8.5MPa), the maximum working pressure can reach 10 ~ 12MPa. Products are widely used in seawater and brackish water desalination, special separation and concentration zero discharge, energy recovery and other industrial equipment. These high quality centrifugal pumps have the characteristics of strong reliability, high efficiency, reasonable structure, long life, low operating cost, convenient installation and maintenance, beautiful appearance and so on. |
 |
| Submersible sewage pump WWK series submersible sewage pump is mainly used in municipal engineering, building construction, industrial sewage, hotels, hospitals, civil air defense, mining and other industries, can be used to discharge with solid particles and a variety of long fiber sewage, wastewater, rainwater and urban domestic water. |
 |
| Control unit Control cabinet and pump set standard technical parameters: Power range: 0.37 ~ 710KW; Number of control pumps: 1 ~ 7; A variety of starting methods, the control cabinet can have a frequency converter, the number of frequency converter and the number of pumps can be one-to-one, can be one-to-more. Automatic switch function of main and standby pumps, overload protection, short circuit protection, phase loss protection, water leakage protection and leakage protection. Features: Full function, strong reliability. Standard component brands ABB and Schneider are the same. |
 |
