Exhibitor List
| Company | LANRY INSTRUMENTS (SHANGHAI) CO., LTD |
| Country | China |
| Products | Outlets Water-supply and sewage-disposal services |
| Hall | E5 |
| Booth | B69 |
| Website | www.lanry-instruments.com |
| Introduction | Lanry Instruments is a professional manufacturer of flow detection instruments. Our products include transit-time ultrasonic flowmeter, Doppler flowmeter, Open channel &partially filled pipe flowmeter, ultrasonic water meter and heat meter. Engaging in the production of flow instruments more than 20 years, Lanry Instruments has possessed the capability of advanced design and accumulated a wealth of field application experience, which lays solid foundation for the commitment to the promotion and innovation of high-tech system solutions.
|
Products
| TF1100-EC Wall-mounted Transit-time Ultrasonic Flowmeter TF1100-EC Wall-mounted Transit Time Ultrasonic Flowmeter works on the transit-time method. The clamp-on ultrasonic transducers (sensors) are mounted on the external surface of the pipe for non-invasive and non-intrusive flow measurement of liquid and liquefied gasses in fully filled pipe. Three pairs of transducers are sufficient to cover the most common pipe diameter ranges. In addition, its optional thermal energy measurement capability makes it possible to carry out a complete analysis of thermal energy usage in any facility. This flexible and easy to use flow meter is the ideal tool for the support of service and maintenance activities. It can also be used for the control or even for the temporary replacement of permanently installed meters. Features: 1. Non-invasive transducers are easy to install, cost effective, and require no pipe cutting or processing interrupt. 2. Wide liquid temperature range: -35℃~200℃. 3. Data logger function. 4. Thermal energy measurement capability can be optional. 5. For commonly used pipe materials and diameters from 20mm to over 6.0m. 6. Wide bi-directional flow range of 0.01 m/s to 12 m/s |
 |
| Transit-Time Insertion Ultrasonic Flowmeter TF1100-EI transit-time Insertion ultrasonic flowmeter provides abundant capabilities for accurate liquid flow measurement from outside of a pipe. It utilizes state-of-the-art technologies on ultrasonic transmission /receiving, digital signal processing and transit-time measurement. The proprietary signal quality tracking and self-adapting technologies allow system to optimally adapt to different pipe materials automatically. Due to hot-tapped mounting of insertion transducers, there is no ultrasonic compound and coupling problem; Even though the transducers are inserted into pipe wall, they do not intrude into the flow, thus, do not generate disturbance or pressure drop to the flow. The insertion (wetted) type has the advantage of long-term stability and better accuracy. Features: 1. Hot-tapped installation, no pipe line flow interrupted. 2. No moving parts, no pressure drop, no maintenance. 3. Spool-piece transducer for best accuracy and better long-term stability. 4. High temp. Insertion transducers are suitable for high temperature of -35℃~150℃. 5. Wide bi-directional Flow range of 0.03 to 36 m/s, and wide range of pipe sizes from DN65 to DN6000. 6. Data logger function. 7. The heat measurement function by configuring with paired temperature sensors. |
 |
| Handheld Transit-Time Ultrasonic Flowmeter TF1100-CH Handheld Ultrasonic Flow Meter works on the transit-time method. The clamp-on ultrasonic transducers (sensors) are mounted on the external surface of the pipe for non-invasive and non-intrusive flow measurement of liquid and liquefied gasses in fully filled pipe. Three pairs of transducers are sufficient to cover the most common pipe diameter ranges.User can use hand to hold as well as to operate the flow meter main unit. This flexible and easy to use flow meter is the ideal tool for the support of service and maintenance activities. It can also be used for the control or even for the temporary replacement of permanently installed meters. Features: 1.14 hours battery (rechargeable), back-lit 4 lines display. 2. Data logger function. 3. Can be used for mobile measurement, flow rate calibration, data comparing, meters running status checking. 4. Non-invasive transducers. 5. Wide bi-directional flow range of 0.01 m/s to 12 m/s. Wide liquid temperature range: -35℃~200℃. 6. Works reliably in both clean and somewhat dirty liquids with turbidity<10000ppm. 7. Lightweight and easily transportable in box. |
 |
| Portable Transit-Time Ultrasonic Flowmeter The clamp-on ultrasonic transducers (sensors) are mounted on the external surface of the pipe for non-invasive and non-intrusive flow measurement of liquid and liquefied gasses in fully filled pipe. Three pairs of transducers are sufficient to cover the most common pipe diameter ranges. In addition, its optional thermal energy measurement capability makes it possible to carry out acomplete analysis of thermal energy usage in any facility.This flexible and easy to use flow meter is the ideal tool for the support of service and maintenance activities. It can also be used for the control or even for the temporary replacement of permanently installed meters. Features： 1.50-hour battery (rechargeable), back-lit 5 lines display all integrated into a rugged, watertight enclosure. 2. Data logger function. 3. The heat measurement function by configuring with paired temperature sensors. 4. Non-invasive transducers. 5. Wide bi-directional flow range of 0.01 m/s to 12 m/s. Wide liquid temperature range: -35℃~200℃. 6. Works reliably in both clean and somewhat dirty liquids with turbidity<10000ppm. 7. Lightweight and easily transportable in box. |
 |
| Wall-mounted Doppler Ultrasonic Flowmeter DF6100-EC Wall-mounted Doppler Ultrasonic Flow Meter is designed to measure volumetric flow of liquid within closed conduit, the pipe line must be full of liquids, and there must be a certain amount of air bubbles or suspended solids in liquid.The Doppler ultrasonic flow meter can display flow rate and flow totalizer, etc., and is configured with 4-20mA, Relays,OCT outputs. Features： 1、 It is suitable for pipe sizes ranging from 40 to 4000mm 2、 For dirty liquids, a certain amount of air bubbles or suspended solids shall be contained 3、Excellent low flow rate measurement ability, low to 0.05m/s 4、 A wide range of flow measurement, high flow rate can reach 12m/s 5、 High-temperature transducer is suitable to liquids of -35℃ ~ 200℃ 6、User-friendly configuration 7、 4-20mA, Relay and OCT outputs 8、 Accuracy: 2.0% Calibrated span 9、Do not need to shut down the pipe flow when installing the transducers |
 |
| Insertion Doppler Ultrasonic Flowmeter Series DF6100-EI Doppler Insertion Ultrasonic Flow Meter can measure metal or plastic pipes with a certain amount of air bubbles or suspended solids.Advanced technique allows this instrument to operate with high reliability and low maintenance. Insertion transducers permit the instrument to be installed without interrupting system pressure or flow. Features： It is suitable for pipe sizes ranging from 65 to 4000mm For dirty liquids, a certain amount of air bubbles or suspended solids shall be contained Excellent low flow rate measurement ability, low to 0.05m/s A wide range of flow measurement, high flow rate can reach 12m/s High-temperature transducer is suitable to liquids of -35℃ ~ 150℃ Do not need to shut down the pipe flow when installing the transducers User-friendly configuration 4-20mA, Relay and OCT outputs Accuracy: 2.0% Calibrated span Applications： Raw sewage Activated sludge Ground water Pulp and paper slurries Chemical slurries Drainage Mining recirculation |
 |
| Doppler Portable Ultrasonic Flow Meter Series DF6100-EP Doppler Portable Ultrasonic Flow Meter is designed to measure volumetric flow of within closed conduit, the pipe line must be full of liquids, and there must be a certain amount of air bubbles or suspended solids in liquid.The Doppler ultrasonic flow meter can display flow rate and flow totalizer, etc., and is configured with 4-20mA, OCT outputs Features： It is suitable for pipe sizes ranging from 40 to 4000mm For dirty liquids, a certain amount of air bubbles or suspended solids shall be contained Excellent low flow rate measurement ability, low to 0.05m/s A wide range of flow measurement, high flow rate can reach 12m/s High-temperature transducer is suitable to liquids of -35℃ ~ 200℃ Do not need to shut down the pipe flow when installing the transducers User-friendly configuration 4-20mA, OCT outputs Accuracy: 2.0% Calibrated span Rechargeable battery can work up to 50 hours |
 |
| Partially Flled Pipe& Open Channel Flowmeter The QSD6537 series flowmeter consists of Flow calculator and the Ultraflow 6537 Sensor, it is used to measure water velocity, depth,pressure temperature and conductivity of water flowing in rivers, streams, open channels and pipes. When used with a companion Lanry DOF6000 Calculator,flow rate and total flow can also be calculated. The flow calculator can calculate the cross-sectional area of partially illed pipe, open channel stream or river,for stream or river,with up to 20 coordinate points describing the river's shape of cross section. It is suitable for various applications.UIltraflow 6537 Velocity and Level Sensor is a unique combination of water velocity, depth, pressure, conductivity and temperature instruments integrated with a solid state logger. It is a new generation of intelligent flow measurement systems. FeatuTes： ◆20 coordinate points to describe cross section of the river's shape. ◆One instrument can measure the velocity,depth and conductivity simultaneously. Velocity Range:0.02mm/s to 12m/s bi-directional, accuracy is 1%. ◆Depth Range: 0 to 10m. ◆ Measure velocity in both forward flow and back flow. ◆ Depth is measured by both the pressure sensor and ultrasonic level sensor principles. ◆With barometric pressure compensation function.·IP68 Epoxy-sealed body design, designed for under water installation. ◆RS485/MODBUS output, connect to computer directly. ◆Portable type with rechargeable battery can work up to 50 hours. |
 |
| Ultraflow Serials Ultrasonic Water Meter Product Features ◆ No moving part, Minimal flow instruction. Enduring accuracy. ◆ Double channels ultrasonic transit-time sensor for High accuracy and reliable operation. ◆ Can measure and storage both forward flow and backflow. ◆ Active leak, theft, backflow, meter damage/tamper, rate of flow, and battery life indication ◆ Above 15 years shelf life. ◆ IP 68 design, longtime under water working. ◆ Standard output is RS485, Lora, NB-IoT, 4-20mA, Pulse, GPRS can be optional. |
 |
| Multi-channel ultrasonic flowmeter Multi-channel plug-in ultrasonic flowmeter adopts the principle of time difference and low power consumption design. It can work continuously for 10 years on battery power supply. It effectively solves the problems of scaling on the inner wall of the pipeline, pipe obsolescence, pipe non-acoustic guide material and so on. Plug - in sensor comes with cut-off ball valve, installation and maintenance are no need to break the pipe interception, convenient and quick. For the material can not be drilled, the surface of the special pipe is not smooth can also be installed by the way of a hoop sensor. Features: ◆ Adopt multi-channel time difference ultrasonic measurement, measurement is more accurate and reliable, accuracy can reach + 0.5%. ◆ Suitable for flow rate 0.01m /s to 12 m/s two-way flow measurement. Repeatability: ≤0.15%. ◆ Low starting flow, wide range ratio, range ratio up to 400:1. ◆ Micro power consumption design, measurement cycle 500ms, 3.6V 76Ah battery power supply, can work continuously for 10 years. Instrument with data storage function, can store day, month, year, accumulated 10 years of data. Insert type online installation, no need to break pipe cut-off, easy installation and maintenance. ◆ Support Pulse, RS485 modbus, NB-IoT(only support telecom), GPRS/GSM transmission. ◆ According to the situation of the scene double channel, four channel optional. |
 |
| Wall-Mounted Dual-Channel Flowmeter TF1100-DC Dual channels ultrasonic transit-time sensor for high accuracy 0.5%. Easy to install, cost effective, and require no pipe cutting or processing intel Wide liquid temperature range: -35C-200C Data logger function. Thermal energy measurement capability can be optional. For commonly used pipe materials and diameters from 20mm to 5m. Wide bi-directional flow range of 0.01m/s to 15 m/s. User-friendly configuration. With the ability of dynamic zero. |
 |
| Insertion Dual-Channel Ultrasonic Flowmeter TF1100-DI Hot-tapped installation, no pipe line flow interrupted. No moving parts, no pressure drop, no maintenance. The aocuracy is 05% for dual channels insertion ultrasonic flowmeter. A wide range of flow measurement, high flow rate can reach 15m/s. High-temperature transducer is suitable to liquids of -35℃ - 150℃. Wide bi-directional flow range of 0.01 to 15m/s, and wide range of pipe sizes from DN65-6000. Data logger function. The heat measurement function by configuring with paired temperature sensors. With the ability of dynamic zero. |
 |
| Portable Dual-Channel Ultrasonic Flowmeter TF1100-DP 50-hour battery (rechargeable), color LCD display all integrated into a rugged, watertight enclosure. Data logger function. The heat measurement function by configuring with paired temperature sensors. Non-invasive transducers. Wide bi-directional flow range of 0.01 m/s to 15 m/s. Wide liquid temperature range: -35℃--200℃. Works reliably in both clean and somewhat dirty liquids with turbidity<10000ppm. Lightweight and easily transportable in box. The accuracy is + 0.5%. With the ability of dynamic zero. |
 |
